咨询热线

13905418708

When the curbstone is processed, it is a square prism, and many of the curbstones we see have a bevel or rounded corner, which is the chamfer we will talk about below.

倒角指的是把棱角切削成一定的斜面，那么路沿石是怎么来进行倒角的呢？小编介绍，路沿石倒角的方式有很多种，比较..的有全自动倒角的，然后还有半自动倒角的和人工倒角的。全自动倒角是利用的专门的倒角机来进行的，设置好参数之后就可以自动工作了，不过这种机器使用的厂家并不是很多，一来是比较的占地方，二来是使用率不高。

Chamfering refers to cutting edges and corners into a certain slope, so how does the curbstone chamfer? The editor introduces that there are many ways to chamfer curbstones, and there are There are fully automatic chamfering, followed by semi-automatic chamfering and manual chamfering. Fully automatic chamfering is carried out using a specialized chamfering machine. After setting the parameters, it can automatically work. However, this type of machine is not widely used by many manufacturers, as it takes up a lot of space and the usage rate is not high.

现在大部分的石材厂并不是只做路沿石的，通常既做各种的火烧板、光板、荔枝面等板材，又做各种路沿石的。因此大部分石材厂还是采用半自动和人工倒角的方式居多。所谓的半自动指的就是利用红外线切割机来进行倒角，在加工路沿石的时候先把毛石切割成所需要的厚度，然后用切机切割成所需规格，..调整锯片的倾斜度就可以倒角了，当然这种方式只适合倒斜角而不能倒圆角

Nowadays, most stone factories do not only produce roadside stones. They usually produce various types of fired boards, polished boards, lychee noodles, and other materials, as well as various types of roadside stones. Therefore, most stone factories still use semi-automatic and manual chamfering methods. The so-called semi-automatic refers to the use of an infrared cutting machine for chamfering. When processing curbstones, the rough stones are first cut into the required thickness, and then cut into the required specifications using the cutting machine Adjusting the inclination of the saw blade allows for chamfering, but this method is only suitable for chamfering and cannot be used for rounding

人工倒角应用的..多的就是倒圆角了，一般1-2cm的1/4圆角是..做的，只要用磨机蹭一下就能够完成了，而..难的就是5cm左右的大圆角了，这种的圆角需要工人一点点的磨出来，而且在磨的时候还必须..统一的弧度，否则路沿石没法排列整齐。

For manual chamfering applications There are many rounded corners, usually 1/4 rounded corners of 1-2cm are It can be done by just rubbing it with a grinder, and The difficult thing is the large rounded corner of about 5cm, which requires workers to grind it out bit by bit, and during the grinding process, it must also Uniform curvature, otherwise the curbstones cannot be arranged neatly.