1、在清理青石路沿石时要选择干净的清理工具,防止石材二次污染;清理时注意不能用水对着青石路沿石进行冲压,还要注意到我们在清洗过程中用温水进行清洁工作,因为温水容易蒸发,不会有过多的水留在石材的表面,这是因为青石路沿石表面水分过高容易渗到石材的内部,破坏内部结构,影响到青石路沿石的使用寿命跟质量;
1. When cleaning the bluestone roadside stones, clean cleaning tools should be selected to prevent secondary pollution of the stones; When cleaning, be careful not to use water to punch the bluestone curbstone. It is also important to note that we use warm water for cleaning during the cleaning process, as warm water is prone to evaporation and there will not be too much water left on the surface of the stone. This is because the high moisture on the surface of the bluestone curbstone can easily penetrate into the interior of the stone, damage the internal structure, and affect the service life and quality of the bluestone curbstone;
2、若是青石路沿石表面沾到油渍难以清理的污渍等,我们可以先用清洁剂进行清洗,在使用工具清理干净,防止留下残留物质;选用清洗剂的时候我们也应该注意选择中性一点的清洗剂,因为清洗剂里面一般都会含有酸碱成分,很容易对石材造成腐蚀现象。
2. If there are oil stains or stains on the surface of the bluestone road that are difficult to clean, we can first clean them with cleaning agents and then use tools to clean them thoroughly to prevent residual substances from being left behind; When choosing cleaning agents, we should also pay attention to choosing neutral cleaning agents, because cleaning agents usually contain acidic and alkaline components, which can easily cause corrosion to the stone.
3、清洗的方法有很多种,列如、水蒸气、低压喷壶等,但是不同场合下使用的方法不同,所以在清理青石路沿石的时候,要根据实际情况进行清理,以免影响清洁的效果, 减少对青石路沿石的伤害。
3. There are many methods for cleaning, such as steam, low-pressure spray cans, etc. However, the methods used in different situations are different. Therefore, when cleaning the bluestone curbstones, it is necessary to clean them according to the actual situation to avoid affecting the cleaning effect and reducing damage to the bluestone curbstones.